180g capacity, 32g maximum tare, readability 0.02/0.1 mg, 75mm weighing pan. 120VAC adapter, 50/60 hertz.

SN 1113192531

International Systec V-95 Advanced Microprocessor Controlled Top Loading Autoclave is equipped for sterilization temperatures up to 140°C and 4 bar of pressure. Systec V-Series autoclaves are equipped direct from the factory for sterilization temperatures up to 140°C and 4 bar of pressure. The Systec V-Series autoclaves have “comprehensive intelligence”: Pressure is controlled via an electronic pressure transducer. Additionally, there is a flexible temperature sensor in the sterilization chamber or in a reference vessel (for liquids) and another sensor at the coldest part of the chamber, the condensate outlet. The microprocessor, specially developed for our laboratory autoclave s, controls all relevant functions such as steam pressure, temperature and sterilization time as well as optional rapid cooling, pre / post-vacuum and drying. Menu-presented instructions in easy to read text form. Membrane keyboard with acoustic confirmation signal. Ergonomically located in a logical and easy to operate position. Product Specifications 16" diameter x 30" deep, accepts up to eight 2-liter flasks, automatic safety door lock, automatic exhaust steam condensation for liquids & solids. Flexible temperature sensor PT-100 for a reference vessel Medium temperature triggering of sterilization time Autofill – automatic filling with demineralized water feed for steam generation Start by clock – timer for programming starting time Collecting point for all outlet pipes Venting valve Product Condition Slightly Used, Great Condition.

electrical: 120V, 60Hz, 1450W. Thermo Scientific no.: 6605

Buchi B-490 Heating Water Bath for Rotary Evaporators

4-L capacity waterbaths accommodate 50- to 3000-mL evaporating flasks. Features corrosion-resistant PTFE coating with aluminum heating pan, insulated outer wall to reduce chance of burns, and two overtemperature shutoffs for added safety. Extended temperature range of 20° to 180°C (68° to 356°F) is suitable for high/low boiling solvents. A 1400 W heater reaches temperature within minutes. LED digital display for temperature. The heating bath, for water or oil, covers a wide temperature range from 20-180°C. A large, clear graphic display continuously shows the actual temperature and the temperature setpoint. Its small volume ensures that warm-up times are very quick. Thanks to the wireless power supply, it is not necessary to make or break connections when handling the bath. The high alloy steel pan is easy to clean. An optional protective shield can easily be fitted to the edge of the bath.

Fisher Scientific 1016S Isotemp Waterbath

Condition: NEW Scratch and Dent
Reservoir dimensions: 11.5" x 6" x 6". Temp range ambient to 99.9 deg C. Digital temp display. Built in calibration capabillity and automatic overtemp protection. Bath temp and setpoint can be programmed to within 0.1 deg C. Comes with stainless steel gable cover and thermometer holder . Product Specifications Volume: 1.5 gallons / 5.5 liters Chamber size: 11.5 x 6 x 6 in. / 29.2 x 15.2 x 15.2 cm BTU Output: 1025 Temperature Range: Ambient to 99.9 °C Product # 51221048 Product Condition NEW. Small dent in cover. Does not effect operation of the unit. Unit is in good working order.

Model: 1171
Serial #: G21417
Type: Chiller/Refrigerated/Recirculator
Temperature Range: -5 to 40 C/ Cooling cap

Condition: NEW
Model #: 1190S
Serial #: 106300066

The compact Allegra X-22 Series is up to 10 inches/ 25 cm thinner than other benchtop centrifuges. With a library of 11 rotors, the Allegra X-22 Series is the space-saving multipurpose solution for your requirements.

Beckman Coulter Allegra 64R refrigerated large capacity super speed centrifuge, microprocessor controlled, to 30,000 rpm, 208V, 60 Hz Beckman Coulter Allegra 64R Refirgerated Large Capacity Super Speed Centrifuge This brushless, induction drive refrigerated centrifuge performs routine spins on the lab bench. Ideal for high-speed separations, including cell gradient spins, nucleic acid precipitations, DNA mini-preps, protein precipitations, phase extractions, spin columns, and subcellular fraction pelleting. Easy-to-use control panel displays actual speed, RCF, time, temperature, and acceleration/deceleration rates. It can be customized for routine runs with multiple acceleration/deceleration profiles. Safety features include a door interlock that prevents contact with spinning rotor and over-temperature/over-speed diagnostics that protect samples. Uses CFC-free refrigerant. The quiet (65dB), brushless induction drive motor can be set in 100rpm increments and is accurate to ±50rpm. A flexible drive shaft helps compensate for drive imbalances. Accommodates a selection of 13 rotors, sold separately. The biosafe bowl rotor contains hazardous spills and aerosols if breakage occurs. It accommodates up to 84 microcentrifuge tubes from 250µL to 1.8mL and can be carried from the centrifuge to a fume hood without breaking the seal. CSA certified. UL listed. C-UL listed. CE approved. Product Specifications 64,000 x g (30,000 rpm) with fixed-angle rotor Spin tubes from 0.25 up to 85 mL Operating temperature from 2º C to 40º C Product Condition New, Scratch & Dent, 208V, 60 Hz, without rotor

large capacity standard speed centrifuge, constant controlled temperature set at 20C, microprocessor controlled, to 10,200 rpm (11,400 g), brushless induction drive, NEW, 208V, 60 Hz, without rotor

ompact high-speed refrigerated microprocessor-controlled benchtop centrifuge, to 15,500 rpm, 2 to 40C, 10 hr timer w/SX4250 swinging bucket rotor, NEW

is useful in application areas such as hematology/oncology, cytology/histology, rheumatology, virology/serology, microbiology, and immunochemistry. This centrifuge includes a rotor however it does not include clips

CAT #: 74000102
S/N: MA457905U

new scratch and dent CAT.# 75004367 SERIAL # 40678024

(new) MODEL # NU 126-300 SERIES 7 SERIAL # 94719111204

Condition: Scratch and Dent Model: ABI433A (current model) Manufactured: 2000, Includes: PC, software, and some accessories guaranteed eligible for ABI installation